Insert MMSI for FURUNO SSB

Post any question, info, tip for Furuno equipment

Insert MMSI for FURUNO SSB

Postby bggr » Sun Jul 05, 2009 11:52 am

Steps to configure the MMSI No on a Furuno SSB System are the following:

1.Power ON the SSB.
2.Press Programming Push Button on TRCV .
3.From menu go to:
Setup  System  Protection (write 652111)  OFF.
4.Write the MMSI No and press ENTER.
User avatar
bggr
 
Posts: 6
Joined: Sat Mar 21, 2009 1:36 pm

Return to FURUNO

Who is online

Users browsing this forum: No registered users and 1 guest

cron